濟南注塑模具廠家今天給大家說說平時用到的模具都是由什麽組成，他們分別起到了什麽作用。
、Jinan injection mold manufacturers today to tell you that usually used by the mold is composed of what, they play a role in what.
該模具主要由澆注係統、調溫係統、成型部件和結構部件組成。在塑模中，澆注係統和模塑零件是與塑料直接接觸的部分，是塑模中最複雜、變化最大、要求加工光潔度和精度最高的零件。

注射模由動模和定模兩部分組成，在注射成型機的移動模板上安裝動模，定模安裝在注射成型機的固定模板上。注塑過程中動模與定模的閉合構成澆注係統和型腔，開模時動模與定模分離以取出塑料製品。為降低模具設計與製造工作量，目前大多數注塑模具均采用標準模架。
The injection mould is composed of a moving mould and a fixed mould. The moving mould is installed on the moving mould of the injection molding machine, and the fixed mould is installed on the fixed mould of the injection molding machine. The gating system and the cavity are formed by the closing of the moving and fixed moulds in the injection molding process. In order to reduce the workload of mould design and manufacture, most injection moulds adopt standard mould bases at present.

下麵我們先說說注塑模具裏麵的澆注係統
Let’s talk about the gating system inside the injection mold first

注塑係統是塑料從射嘴進入型腔前的流道部分，包括主流道、冷料穴、分流道、澆口等。
The injection molding system is the part of the runner before the plastic enters the cavity from the injection nozzle, including the main runner, the cold material hole, the branch runner, the gate and so on.

澆鑄係統也叫流道係統，是將塑料熔體從注射機噴嘴引導到型腔內的一係列進料通道，通常包括主流道、分流道、澆口和冷料穴。其成形性與塑料製品的成型質量和生產效率密切相關。
A casting system, also known as a runner system, is a series of feeding channels that guide the plastic melt from the injector nozzle to the cavity, usually including the main runner, distributor, gate, and cold pockets. Its formability is closely related to the molding quality and production efficiency of plastic products.

今天先說到這裏，詳細了解注塑模具裏麵的調溫係統和其它部件，關注後麵為大家一一介紹。
Today first said here, detailed understanding of the injection mold inside the temperature control system and other parts, attention to the following for everyone to introduce.