注塑模具加工對應的產品類別主要由塑膠材料製成，與之對應的加工方式也大同小異。注塑模具加工工藝是否精準到位，關乎成品的精度與實際質量水準，若未達到標準，有必要采取返工等方式，對工廠帶來的損失將不可估量，為此需關注加工期間應落實到位的事項。濟南注塑加工廠家認為注塑模具加工時要看其設備運行狀態！

The product categories corresponding to the processing of injection molds are mainly made of plastic materials, and the corresponding processing methods are also similar. Whether the processing technology of the injection mold is accurate and in place is related to the accuracy and actual quality level of the finished product. If it does not meet the standard, it is necessary to adopt rework and other methods, and the loss to the factory will be immeasurable. Therefore, it is necessary to pay attention to the matters that should be implemented during the processing. Jinan injection molding factory believes that the processing of injection molds should be based on the operating status of its equipment!

1、全程關注設備運行的狀態是否正常

1. Pay full attention to whether the equipment operates normally

有意向的客戶會加倍留意注塑模具加工視頻，希望能從中看出一些端倪，與其把注意力放在視頻上，倒不如直接關注注塑模具加工的運行狀態。此舉的好處是能起到全麵監控的作用，從裝置運行期間的具體表現能大致推斷出它是否正常，這一點較關鍵。

Interested customers will pay more attention to the video of injection mold processing, hoping to see some clues from it. Instead of focusing on the video, it is better to directly focus on the operation status of injection mold processing. The advantage of this action is that it can play a comprehensive monitoring role, and it is critical to roughly infer whether the device is normal from the specific performance during operation.

2、提前調試好設備的相關按鈕

2. Relevant buttons of the equipment shall be debugged in advance

注塑模具加工時的注意事項包括對各種按鈕的精準調控，畢竟這屬於一項專業度高的加工任務，但凡出現較大偏差引發的後果將不堪設想。若是能通過調試這一行為將按鈕各歸其位，便可以規避偏差的產生，而這也是操作人員會反複考量的內容。

Precautions during injection mold processing include precise control of various buttons. After all, this is a highly professional processing task, and the consequences caused by any large deviation will be unimaginable. If the buttons can be placed in their respective positions through debugging, the deviation can be avoided, which is also the content that operators will consider repeatedly.

3、注意控製料流的速度

3. Pay attention to control the speed of material flow

注塑模具加工時的注意事項還包括對料流速度的控製，千萬別輕易忽略這一點，若對速度的把控不恰當，會導致料流過快凝固，幹擾其餘工作的正常開展。一旦料流凝固的速率過快，甚至會降低成品的精度，相信這是客戶不願親眼目睹的場景。

Precautions during the processing of injection molds also include the control of material flow speed, which should not be easily ignored. If the speed is not properly controlled, the material flow will solidify quickly and interfere with the normal development of other work. Once the solidification rate of the material flow is too fast, the accuracy of the finished product will even be reduced. I believe this is a scene that customers do not want to witness.

為了推動整項注塑模具加工工作穩步向前推薦，上文歸納總結的三部分工作務必落實到位，以免因一時疏漏引發不必要的損失和問題。尤其是本身操控不熟練的人，越發要把這幾項內容深諳於心，旨在完善自己的操控流程，做到萬無一失。關注我們http://www.lsjtcyjt.cn，谘詢了解更多事項！

In order to promote the steady forward recommendation of the whole injection mold processing work, the three parts of work summarized above must be implemented in place to avoid unnecessary losses and problems caused by temporary omissions. In particular, people who are not proficient in their own control should be more familiar with these contents in order to improve their own control process and make sure that they are safe. Follow us http://www.lsjtcyjt.cn Yes, consult for more information!